搜索历史清除全部记录
最多显示8条历史搜索记录噢~
All
  • All
  • Product Management
  • News and Information
  • Introduction content
  • Enterprise outlets
  • Frequently Asked Questions
  • Corporate Video
  • Company Portfolio
Confirm

Types of construction rubble


   Construction rubble Category:
  Concrete is a hard, durable building material made from materials such as sand, lime, pebbles, and crushed stone.
  1. Pebbles are rock particles with a particle size greater than 4.75 mm, formed through natural weathering, transportation and sorting by water flow, and subsequent accumulation.
  2. Crushed stone is rock aggregate with a particle size greater than 4.75 mm, produced by mechanically crushing and screening natural rocks or pebbles.
  3. Needle- and flake-shaped particles: Particles classified as needle-shaped are those whose length exceeds 2.4 times the average particle size of the corresponding particle size class; particles classified as flake-shaped are those whose thickness is less than 0.4 times the average particle size (the average particle size refers to the arithmetic mean of the upper and lower limits of the particle size class).
  4. Silt content (material finer than 75 μm in pebbles and crushed stone): The proportion of particles with a particle size smaller than 75 μm in pebbles and crushed stone.
  5. Clay lump content: The percentage of particles in gravel and crushed stone with a nominal size greater than 4.75 mm that, after being soaked in water and squeezed by hand, become smaller than 2.36 mm.
  6. Soundness: The ability of pebbles and gravel to resist fracturing under the influence of natural weathering and other external physicochemical factors.
  7. Alkali-aggregate reaction refers to a swelling reaction in which alkalis from concrete constituents such as cement and admixtures, as well as from the surrounding environment, slowly react with alkali-reactive minerals in aggregates under moist conditions, leading to cracking and deterioration of concrete.
  8. Specifications: By pebble, Construction rubble Particle size is classified into single-size fractions and continuous-size fractions. Additionally, depending on requirements, different single-size fractions of pebbles and crushed stones can be mixed to create special-sized pebble and crushed stone aggregates.
  9. Category I is suitable for concrete with strength grades greater than C60; Category II is suitable for concrete with strength grades ranging from C30 to C16, as well as for concrete requiring freeze-thaw resistance, impermeability, or other specific performance characteristics; Category III is suitable for concrete with strength grades lower than C30.
 
 
 
 
 
 

Recommended Articles